Operation Manual

60
conversion tool interface.
3) Properties setting
Before converting AV files, some important parameters of the video files need to be set, such as the type (AVI or
WMV), the intercepted part and the length of the video file, image exchange, image quality. There are two
methods to enter the properties setting interface:
A. After selecting one or more AV files, click the settings button in the “output information” column to
enter;
B. After selecting one or more AV files, right click the mouse and select “settings” to enter;
“Select” here does not mean checking the AV file in the check box, but using the mouse to click file name to
make the file background color blue.
4) Start converting file
Confirm that the check box of the AV file to be converted is checked. Press the conversion button in
the tool interface to start, the tool begins to convert all selected AV files of which the check box has been checked,
and the file status will be changed from “not processed” into “being converted”, and the conversion progress bar
will be displayed in the conversion progress column at the same time.
In addition to the above file conversion methods, the AV files stored in the hard disk may also be selected and
converted by right clicking the mouse and selecting the “start video conversion” in the pop-out menu, and the tool
will automatically run and directly start file conversion.