MTMP29 User Manual
For your safety ─ Read this user guide carefully to ensure proper use of the product and to avoid any danger of physical damage.
Note: Please recharge the digital player before using it! Function features The player supports MP3, WMA and WAV format music files. Including WMA files with DRM (Digital Rights Management) function. Support USB 2.0 capability, much faster than USB 1.1, to enable faster communication with your PC. The player can record outside voice and FM radio. The player has repeat functions. The player has Video Playback, Photo Viewer, E-book, slide show functions, etc.
USB Cable Earphones Components and Button functions 3 Quick Start Guide
4
Charging Li –polymer battery safely 1. Connect the PC USB port and the player USB port with the provided USB cable. 2. The power sign is shown dynamic when charging, once full charged, the power sign will stop moving, power is full, please shut off the power. The charging time is approximately 2 hours. 3. To stop recharging, disconnect the USB cable. Notes Before your first time use, please recharge your digital player. Your computer must be turned on while connected to your player for charging.
“Music” menu). To return main menu: Press and hold M button. To Pause/Play: Short press button. To change tracks: Short press【 / 】button. To turn unit off: Press and hold button. NOTE: 1. Please reset your player by pressing the RESET hole for 2 seconds while failing to power on or hanging up in power on mode. 4. Volume Adjustment: In music or MTV files playing, Voice, FM tuner mode, short press R/V button to pitch on the volume rim, at this time press【 / 】button to turn down or turn up volume.
3. Delete files from the removable USB storage (use the "Delete" command). Remove the player from PC – please follow the steps in case of damaging the player or data loss. 1. Click the left mouse button on the icon that is on the taskbar at the bottom right corner of the desktop. 2. Click the "Safely remove USB Mass storage Device – Drive (X:)" column. 3. Disconnect the player from your computer.
CAUTION: Do not remove the player while files within the USB Mass Storage are being played on your computer. Do not disconnect the player from your computer or press M / while transferring files, or it will cause damage to the player or data loss. Menu Navigation M button: Enter main menu, submenu or return. Skip button【 / 】: Shift menus. Play/Pause button ( ): Play, Pause, or confirm. 1. Press and hold M button to enter main menu. 2. Press【 / 】buttons to select your desired option (e.g.
2. Short press【 / 】buttons to select the music files. 3. Press R/V button and you can select: “Add to list" or “Delete”. 4. Press button to confirm. 5. You can select one of the music files and press button to playback. 6. Press M button to return to previous list. Classified 1. Select Classified mode and short press button to enter. 2. Short press【 / 】buttons to select “No” or “Yes”. 3. Press button to confirm. NOTE: 1.
4. Download music files to the player. 1). Click “Select Music” command to input music files (*.mp3, *.wma formats). 2). Click ”Download Music” command to download selected music into the device and create/refresh music classification database.
5. Click “Delete Music” command to delete music files on the device side and create /refresh music classification database. NOTE: 1. The “ClassifyMusic” AP only can classify music files within the internal flash; 2. About the detailed introduction to the Classify Music AP, please refer to: ”MusicClassify” folder→“Music_Classification_AP” word format file.
Random). 3. Short press button to confirm. Equalizer 1. Select Equalizer mode and short press button to enter. 2. Short press【 / 】buttons to select your desired option (e.g. Normal, Pop, Rock, Classic, Jazz, Bass, Custom EQ). 3. Short press button to confirm. Custom EQ: you can setup the EQ as your opinion, just need to pitch on the adjustment frame by pressing R/V button and press【 / 】buttons to adjust. NOTE: EQ mode is not obvious while playing WMA format music files. 3D 1.
of the player and you will see the slide show maker AP) to make slide show files for our portable audio player chip. It transforms many images files into single slide show file. The effect of the slide show is like the window protection program on PC Windows. When a music file is played for a while and end users do not have any actions, the pictures in the slide show file will be displayed one bye one.
Make Slide Show 1. Required System: Windows 2000, XP, Vista 2. AP Operation: 1) View of “Image File Name List” – Show all image input files.
Down), Circle 4) Command of “Load Image” – Input image files. (*.jpg, *.gif, *.bmp) 5) Command of “Preview” – Show the effects of the slide show. 6) Command of “Transform” – Transform all image input files to single slide show file. 7) Command of “Cancel” – Cancel preview or transformation. 8) Command of “Delete” – Delete selected image files in the image file name list. 9) Command of “Up” – Move the selected image file up in the image file name list.
③ You can set configuration files: Language, Panel Size, Panel Type, as pictures shows: 16
NOTE: You must set the panel size is: 128x128. ④Then save the setup. 2) Click “Load Image” command to load Images (*.jpg, *.gif, *.bmp) 3) Manage Image File Name List (Using the “Delete”, “Up”, “Down” command) 4) Select a mode of the slide show & Preview: Normal, Shutter (Left to Right), Shutter (Top to Bottom), Circle. 5) Click “Transform” command to transform the images into SLS file.
NOTE: About the detailed introduction to the slide show AP, please refer to: ”SlideShowMaker” folder→“Slide_Show_Maker_AP” word format file. A-B 1. Select A-B mode and short press button to enter. 2. Short press R/V button to select A point, short press R/V button again to start A-B repeat mode, short press R/V button for the third time to cancel A-B repeat mode. Play Rate 1. Select Play Rate mode and short press button to enter. 2. Short press【 / 】buttons to select your desired speed (e.g. 1.00X, 1.14X, 1.
2. 3. 4. 5. 6. pressing button. Short press【 / 】button to choose the recorded files, and press button to playback your desired recorded file. Press and hold R/V button to start recording. Short press M button to save the recorded file, and press button to playback it. Whilst in playback mode short press M button to enter into submenu (e.g. File, Storage Repeat, Equalizer, 3D, A-B, Play Rate). this part please refer to Press and hold M button to return to main menu. PHOTO 1.
2. If the JPEG image files has thumbnail, you can see their miniatures in PHOTO list. SETUP 1. In main menu, short press【 / 】buttons to select “Setup“ mode and enter by pressing button. 2. Short press【 / 】buttons to select the submenu: USB Mode, Power, Language, Display, Record, Sys Tools, Storage. 3. Short press button to confirm.
Short press【 / 】buttons to select “Brightness” or “Backlight” menu, and enter by pressing button. 2. Short press【 / 】buttons to setup screen brightness or screen backlight time .Then save the setup by pressing button. Note: the default brightness is maximum, you can press【 / 】button to adjust it. 1. Record Short press【 / 】buttons to select: Quality, VAD, AGC. Quality: Press【 / 】button to select “Long Time” “Normal Quality” “High Quality” mode.
If you select “Yes”, it will start to refresh, and you can press M button to cancel the process. File Sort: Press【 / 】button to select “Force Sort” or “Auto Sort”. Sys Info Select “Sys Info” and enter by pressing button, then you can see some system information, like: Firmware version, free flash capacity, and All flash capacity. 3. Storage 1. Select “Storage” and short press button to enter. Short press【 to select Internal or Micro SD/T-Flash. 2.
Usage steps for conversion: 1. Click “Input Video” column to select the video file you wish to convert for use on the digital player.
2. 3. 4. Select the “Advanced Setting” and setup the “Output Video Quality” (Include High Quality, Normal Quality, Medium Quality, Low Quality). Select “Output Frame Size” is 128x128. The default “Output Audio Quality” is Good.
5. 6. MTV video converter allows the user to replace the video clip audio track with an audio file of their own choice. To do this, select the “Input Music” button and choose a music file to replace the original background audio of the input video clip. (Go to 6. if you want to keep the original audio of the video input clip.) MTV video converter allows the user to convert a segment of the selected video clip rather than the whole clip.
2 pressing button. Short press M button to enter submenu: Repeat Repeat: You can select the repeat mode by pressing【 / 】button: No Repeat, Repeat One, Repeat All, Random All, Folder Normal, Folder Repeat, Folder Random. 3. Select one of the video files stored in the player, you can press R/V button to enter “Delete” menu, and press【 / 】to select “No” or “Yes”, then press button to confirm. 4. Select one of the MTV files stored and press button to playback it. EBOOK 1.
1. Short press【 / 】 button to select “FM Tx.“ and enter by pressing button. 2. Press【 / 】button to select “Setup” or “On/Off”, and press button to enter. Setup: Select “Setup” mode and short press button to enter, at this time you can adjust the frequency (from 88.1 to 107.9MHz) by pressing【 / 】button (at intervals of 0.2MHz), then Press button to save your setup. On/Off: Select “On/Off” mode and short press button to enter, then you can select “Off” or “On” mode by pressing【 / 】button.
1. Install USB Disk Win98 driver for computer windows98 Operating system (1) Double click the USB Disk Win98 driver that is in the flash of the player. (2) Select installation language and click “OK” to enter into next step (Please select the default language).
(3) Click “Next>” to enter into next step.
30
(4) Close the Driver (X:) window, then click “OK” to finish setup process and restart your computer now, then you can use the player.
2. Format the MP4 player The player is “FAT” format. If you wish to format it, right click removable disk and choose “Format” mode, then click “Start” to format in operating system. As following pictures show: Notice Please setup the HOLD button in “unlock” mode before using the player. Do not use the player while raining. Attention should be drawn to the environmental aspects of battery disposal. Please use provided USB cable to connect the player with PC directly.
The user guide is only for reference. It is standard by the sample. The li-polymer battery is consumptive material, so recharge it periodically is needed even if the player is not be used. Technical Specification No. 2 3 4 5 6 Name Capacity of Flash Memory USB Interface LCD Display Power supply S/N ratio Audio Frequency Range 7 EQ 8 Support file format USB2.0 (High Speed) 1.
If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive) www.mitone.