Operator`s manual

2800LX ,UX / 3600UX Brushcutter
15
Original Instructions Version July 12
Installing the Nylon Head
• Lay the brush cutter on its back with the gearbox shaft facing up.
Rotate the gear box shaft until the hole in
the holder lines up with the slot in the plastic
guard.
Insert the Allen key into the hole in the
gearbox cover and into holder.
Screw the nylon head anti-clockwise (turn
left) onto the threaded shaft on the end of
the gearbox.
Make sure that the nylon head is securely
locked in position and remove the Allen key.