Operator`s manual

2800LX ,UX / 3600UX Brushcutter
3
Original Instructions Version July 12
Warnings in the Manual
This mark indicates instructions which must be followed in order to prevent accidents which could lead to
serious bodily injury or death.
This mark indicates instructions which must be followed or it leads to mechanical failure, breakdown, or
damage.
This mark indicates hints or useful directions in the use of the product.
PRODUCT DESCRIPTION
This Brush Cutter is a 2 stroke fast running power tool and is designed to be used in a domestic application
for trimming grass and light brush.
IMPORTANT
!
NOTE
Component Location
1 BLADE 3 Point blade for grass, weed or brush cutting applications.
2 DRIVE SHAFT Contains the drive shaft.
3 THROTTLE TRIGGER Spring loaded to return to idle when released.
4 IGNITION SWITCH Slide switch, forward to run, back to stop.
5 SAFETY LEVER Prevents accidental operation of the throttle.
6 HANDLE This handle can be adjusted for maximum comfort
7 HARNESS ASSEMBLY Fully adjustable for maximum comfort
8 PETROL CAP
9 PURGE BULB Push the purge bulb to remove the air from the fuel system.
10 FUEL TANK Contains fuel and fuel lter
11 AIR CLEANER Contains replaceable lter
12 CHOKE To help in cold starting
13 STARTER HANDLE Pull to start the engine
14 DEBRIS SHIELD Helps protect the operator from debris
15 CUT-OFF KNIFE Cuts the nylon line to the correct length
16 NYLON CUTTER HEAD Contains replaceable nylon trimming line
17 FRONT HANDLE This handle can be adjusted for maximum comfort
18 GEARBOX For attaching a blade or nylon head to
19 REAR HANDLE Incorporating throttle trigger, switch, and safety lever
20 HARNESS FIXING POINT Fixing point to attach the harness
21 BLADE COVER Blade cover for transportation