Operator`s manual
2800LX ,UX / 3600UX Brushcutter
8
Original Instructions Version July 12
Never hold the brush cutter in a way in which the cutting head is pointing towards someone else.
Never allow the blades to come into contact with your body.
Always turn o the engine before adjusting the brush cutter, or at any time when coming into close
proximity with the cutting head.
Always wear thick work gloves when adjusting the brush cutter.
Safe Handling of Fuel
The engine of the brush cutter is designed to run on a two stroke oil/fuel mixture.
This fuel is highly ammable, never store cans of fuel or rell the fuel tank in any place where there is a source
of heat or re, which might ignite the fuel.
Do not smoke whilst operating the brush cutter or relling, keep lit cigarettes away from the brush cutter at
all times.
When relling the fuel tank always stop the engine rst and carefully make sure that there are no sparks or
naked ames anywhere nearby before refuelling.
If any fuel spillage occurs during refuelling, use a dry rag to wipe any fuel which has been spilled onto the
brush cutter before starting the engine.
After refuelling, screw the fuel cap back tightly onto the fuel tank and carry the brush cutter to a spot 5
metres or more away from where it was refuelled before starting the engine.