User's Manual Part 2

Chapter 12 Maintenance
BM2022w User’s Guide
187
12.3 HTTP
Use this screen to allow remote access to the WiMAX Device from a network connection over HTTP.
Click Maintenance > Remote MGMT > HTTP to open this screen as shown next.
Figure 108 HTTP Screen
This screen contains the following fields:
12.4 Telnet
Use this screen to allow remote access to the WiMAX Device from a network connection over Telnet.
Table 84 HTTP
LABEL DESCRIPTION
HTTP Server
Enable Select this to enable remote management using this service.
Port Number Enter the port number this service can use to access the BM2022w. The
computer must use the same port number.
HTTPS Server
Enable Select this to enable remote management using this service.
Port Number Enter the port number this service can use to access the BM2022w. The
computer must use the same port number.
HTTP and HTTPS
Allow
Connection
from WAN
Select this to allow incoming connections from the WAN over either HTTP or
HTTPS.
HTTP Session Timeout
Session
Timeout
Enter the number of minutes (0-99) the BM2022w waits to delete an inactive
web connection (HTTP or HTTPS).