User`s manual

39
Dimensions
All measurements in mm.
Notes:
(1) Make sure to secure the unit with anchor bolts.
(2) Make sure to allow the space of 2m or more above the unit.
(3) Connect the refrigerant piping (suction gas side, discharge gas side, liquid side) at local site.
(4) The refrigerant piping connection entrance and the power supply intake are of the half blank
shape. Cut it with the nipper etc., when you use.
(5) Use ø88 (or ø100) for the refrigerant piping connection entrance.
(6) Please use the anchor hole (M10x10) marked I and J and M for a renewal purpose.
(7) Please connect the oil equalization pipe marked K with only the outdoor combination unit.
(8) Please use combination trestle (option) when you use the trestle by outdoor combination
unit.
Installation example
1
500
10
100
10
1500
No limited
1000
No limited
2
Open
10
100
Open
–
No limited
No limited
–
Dimensions
L1
L2
L3
L4
H1
H2
H3
H4
Mark Content
680560-K 615560504
A
B
C
D
F
G
H
K
L
N
Refrigerant suction gas piping connection entrance
Refrigerant liquid piping connection entrance
Refrigerant discharge gas piping connection entrance
Power supply entry hole
Anchor bolt hole
Drain waste water hose hole
Drain hole
Refrigerant oil equalization piping connection pipe
Carrying in or hole for hanging
Refrigerant piping exit hole
ø28.58(Brazing)
ø12.7(Flare)
ø50(right
.
left
.
front),long hole 40x80(under side)
M10,4pcs.
ø45,3pcs.
ø20,6pcs.
ø9.52(Flare)
180x44.7
ø88(or ø100)
ø22.22(Brazing) ø25.4(Brazing)