Instruction Manual

Vehicle equipment
i
These Operating Instructions describe all
standard and optional equipment available
for your vehicle at the time it was pur-
chased. Please note that your vehicle may
not be equipped with all features descri-
bed.
Display settings
Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
X
Press the W button.
X
Select Settings by turning cVd the
COMAND controller and press W to con-
firm.
X
Select Display and press W to confirm.
X
Select Brightness and press W to con-
firm.
X
Adjust the brightness by turning cVd the
COMAND controller and press W to con-
firm.
Display design
Your COMAND display features optimised
designs for operation during daytime and
night-time hours. You can customise the
design by manually selecting day or night
design or opt for an automatic setting.
X
Press the W button.
X
Select Settings by turning cVd the
COMAND controller and press W to con-
firm.
X
Select Display and press W to confirm.
X
Select Day design, Night design or
Automatic by turning cVd the COMAND
controller and press W to confirm.
A dot indicates the current setting.
Design Explanation
Day design
The display is set perma-
nently to day design.
Night design
The display is set perma-
nently to night design.
Automatic When the Automatic
setting is selected,
COMAND evaluates the
readings from the auto-
matic vehicle light sen-
sor and switches
between the display
designs automatically.
Time settings
General information
If COMAND is equipped with a navigation sys-
tem and has GPS reception, COMAND auto-
matically sets the time and date. You can also
adjust the time yourself in 30-minute incre-
ments, but the date cannot be changed.
i
If you set the time in 30-minute incre-
ments, any time zone settings and settings
for changing between summer and stand-
ard time are lost (Y page 43).
42
Time settings
System settings