User's Manual

X
Select a route and press W to confirm.
The map appears with a menu. The recor-
ded route is shown in the map with a blue
dotted line.
X
To view a demonstration of the route
on the map: select Demo by turning cVd
the COMAND controller and press W to
confirm.
The map with the crosshair appears.
X
Proceed as described in the "Route dem-
onstration" section (Y page 99).
X
To begin route calculation: select Start
in the menu by turning cVd the COMAND
controller and press W to confirm.
COMAND Online attempts to align the
recorded route with the digital map.
Changing route names and icons
X
Select Edit in the menu by turning cVd
the COMAND controller and press W to
confirm.
X
To change the route name: select
Rename and press W to confirm.
i
The name cannot be changed while the
vehicle is in motion.
X
To change the icon: select Change icon
and press W to confirm.
Please see further information on managing
categories for personal POIs (Y page 84).
To change direction for route calcula-
tion: you can set the icon for the route to the
starting point or to the destination, thereby
changing the direction for route calculation.
During route calculation, one-way streets or
turn restrictions, for example, are taken into
account. Therefore, the outward and return
routes may differ from each other.
X
Select Swap in the menu by turning cVd
the COMAND controller and press W to
confirm.
X
To delete a route: select Delete in the
menu by turning cVd the COMAND con-
troller and press W to confirm.
A prompt appears asking whether the route
should be deleted.
X
Select Yes or No and press W to confirm.
If you select Yes, the route will be deleted.
If you select No, the process will be cancel-
led.
Scanning the memory
The SD memory card is inserted.
Route guidance
101
Navigation
Z