User's Manual

Unit of measurement : in the COMAND dis-
play depends on the selection made for the
instrument cluster; see the separate vehicle
Owner's Manual.
X
To hide the menu: slide ZV the COMAND
controller and, when the Full screen
menu item is shown, press W.
X
To call up the scale bar: as soon as you
turn cVd the COMAND controller, scale
bar ? appears.
X
Turn cVd until the desired scale is set.
Moving the map
Showing the crosshair
Map with crosshair
:
Current vehicle position
;
Crosshair
=
Details of the crosshair position
?
Map scale selected
X
To hide the menu: slide ZV the COMAND
controller and, when the Full screen
menu item is shown, press W.
X
To scroll the map: slide XVY, ZVÆ or
aVb the COMAND controller.
A crosshair appears on the map. If you slide
it again, the map moves in the correspond-
ing direction under the crosshair.
Display = may be the name of a street, for
example, provided the digital map contains
the necessary data. It shows the geo-coordi-
nate position of the crosshair if the Geo-
coordinates display is switched on
(Y page 114).
Hiding the crosshair and centring the
map on the vehicle position or destina-
tion
X
Press the % back button twice.
The crosshair disappears and the map is
set to the vehicle position.
Centring the map on the vehicle's posi-
tion
X
To show the menu: press W the COMAND
controller.
X
Select Position in the navigation system
menu bar by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
X
Select Vehicle position map and press
W to confirm or, if the crosshair is shown,
press the % back button.
This hides the crosshair.
Centring the map on the destination
position
This function requires that a route to a desti-
nation has been calculated. If the route has
waypoints and an intermediate stop, the map
can also be set to these positions.
X
To show the menu: press W the COMAND
controller.
X
Select Position in the navigation system
menu bar by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
X
Select Destination position map and
press W to confirm.
The crosshair is centred on the respective
destination.
112
Map operation and map settings
Navigation