User's Manual

Table Of Contents
i
Even if the sound is switched off, you will
still hear traffic and navigation system
announcements.
Switching Traffic Programme and navi-
gation announcements on again
X
To switch Traffic Programme off: press
and hold the 8 button until the . dis-
play disappears from the status bar of the
display.
A confirmation tone sounds.
X
To switch the Traffic Programme on
again: press and hold down the 8 but-
ton until the . display in the status bar
appears.
A confirmation tone sounds.
X
To switch navigation announcements
off: press and hold the 8 button during
an announcement.
X
To switch navigation announcements
on again: switch COMAND Online off and
then on again (Y page 29).
or
X
Start a new route calculation
(Y page 68).
or
X
To have the announcement repeated while
the navigation menu is shown, select +
and press W to confirm (Y page 95).
Adjusting the volume
Adjusting the volume for the audio or
video source
X
Turn the q control knob
or
X
Press the W or X button on the mul-
tifunction steering wheel.
The volume of the currently selected audio
or video source changes.
You can also adjust the volume for the fol-
lowing:
R
traffic announcements
R
navigation announcements
R
phone calls
R
LINGUATRONIC voice control (see the sep-
arate operating instructions)
Adjusting the volume for traffic
announcements and navigation
announcements
You can adjust the volume of traffic and nav-
igation announcements independently, rela-
tive to the volume of the audio or video
source.
During traffic or navigation announcements:
X
Turn the q control knob.
or
X
Press the W or X button on the mul-
tifunction steering wheel.
Adjusting the volume for phone calls
You can adjust the volume for hands-free
mode during a telephone call.
X
Turn the q control knob.
or
X
Press the W or X button on the mul-
tifunction steering wheel.
30
Basic functions of COMAND Online
At a glance