User's Manual

Features of your COMAND Online
This Supplement describes all the standard
and optional equipment for your COMAND
Online system, as available at the time of
going to print. Country-specific differences
are possible. Please note that your
COMAND Online system may not be equip-
ped with all the features described.
Display settings
Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
X
Press W.
X
Select System by turning cVd the
COMAND controller and press W to con-
firm.
X
Select Display and press W to confirm.
X
Select Brightness and press W to con-
firm.
X
Adjust the brightness by turning cVd the
COMAND controller and press W to con-
firm.
Display design
Your COMAND Online display features opti-
mised designs for operation during daytime
and night-time hours. You can customise the
design by manually selecting day or night
design, or opt for an automatic setting.
X
Press W.
X
Select System by turning cVd the
COMAND controller and press W to con-
firm.
X
Select Display and press W to confirm.
X
Select Day design, Night design or
Automatic by turning cVd the COMAND
controller and press W to confirm.
A dot indicates the current setting.
Design Explanation
Day design
The display is set perma-
nently to day design.
Night design
The display is set perma-
nently to night design.
Automatic If the Automatic setting
is selected, COMAND
Online evaluates the
readings from the auto-
matic vehicle light sen-
sor and automatically
switches between the
display designs.
Time settings
General notes
If COMAND Online is equipped with a naviga-
tion system and has GPS reception, COMAND
Online automatically sets the time and date.
You can change the time in minute incre-
ments. The date can also be changed.
i
If you adjust the time in minute incre-
ments, any time zone settings and settings
for changing between summer and stand-
ard time are lost. Switching between sum-
mer and standard time (Y page 45).
44
Time settings
System settings