User's Manual

Importing/exporting data
X
Insert the SD memory card (Y page 217).
or
X
Connect a USB device (e.g. a USB memory
stick) (Y page 218).
X
Press the W button.
The system menu appears.
X
Select System by turning cVd the
COMAND controller and press W to con-
firm.
X
Select Import/export data and press
W to confirm.
X
Select Import data or Export data and
press W to confirm.
If PIN protection is activated, a PIN prompt
appears when you select Export data.
X
Enter the PIN, select¬and press W to
confirm.
You can now proceed in the same way as if
PIN protection was deactivated.
X
To select a preset: select Memory card or
USB storage and press W to confirm.
X
Select All data and press W to confirm.
This function exports all the data to the
selected disc.
or
X
Select the data type and press W to con-
firm.
Depending on the previous entry, select the
data type for the export O or not ª.
X
Select Continue and press W to confirm.
i
Personal music files in the MUSIC REGIS-
TER cannot be saved and imported again
using this function.
Reset function
You can completely reset COMAND Online to
the factory settings. Amongst other things,
this will delete all personal COMAND Online
data. This includes the station presets,
entries in the destination memory and in the
list of previous destinations in the navigation
system and address book entries. In addition,
an activated PIN protection, which you have
used to protect your data against unwanted
export, will be deactivated. Resetting is rec-
Reset function
49
System settings