User's Manual

Calling up drive status regulator (ABC)
X
Press W.
X
In the system menu, slide ZV the
COMAND controller up until the display/
selection window is selected.
X
Slide XVY the COMAND controller repeat-
edly until the drive status regulator (ABC)
appears.
The corresponding displays appear in the
COMAND display.
Details on the displays:
R
for vehicles except AMG vehicles; see the
separate vehicle Owner's Manual
R
for AMG vehicles; see the separate vehicle
Owner's Manual
Exiting the display
X
Slide XVY the COMAND controller until
the desired display (clock or fuel consump-
tion) is shown.
Seat functions
Overview
Using the T button next to the COMAND
controller or the Seat menu item in the sys-
tem menu, you can call up different setting
functions: The following settings depend on
the type of seat and the vehicle model series.
R
seat cushion length
R
backrest side bolsters
R
lumbar
R
balance
R
cushion side bolsters
R
driving dynamics
R
massage
i
You also can save and recall the current
settings of a seat function using the mem-
ory button and the corresponding memory
position switch; see the separate vehicle
Owner's Manual.
The massage function cannot be started or
stopped using the memory button.
Selecting the seat
First select the seat which you wish to adjust.
This function is not available for all vehicles.
X
Press the T or W button.
X
Select Seat and press W to confirm.
X
To switch to the lower line, for both options
slide VÆ the COMAND controller.
X
Select Driver's seat or Front-pass.
seat by turning cVd the COMAND con-
troller and press W to confirm.
Adjustment functions
To adjust the seat cushion length
The availability of this function depends on
the type of seat and the vehicle model series.
This function allows you to adjust the height
of the seat cushion.
54
Seat functions
Vehicle functions