Specifications

4- 6
4. REPLACEMENT FROM A-MOTION TO QN-MOTION
2.3 Operating System Software Correspondence
Use an operating system for Q173CPUN/Q172CPUN.
Application
When A17nSHCPUN/A173UHCPU is used
→
When Q17nCPUN is used
Model Model
For conveyor
assembly
(SV13)
For A173UHCPU
SW2SRX-SV13B
For Q173CPUN SW6RN-SV13QB
SW2NX-SV13B
SW3RN-SV13B
For A172SHCPUN
SW0SRX-SV13D
For Q172CPUN SW6RN-SV13QD
SW0NX-SV13D
SW3RN-SV13D
For A171SHCPUN
SW2SRX-SV13G
SW0NX-SV13G
For automatic
machinery
(SV22)
For A173UHCPU
SW2SRX-SV22A
For Q173CPUN SW6RN-SV22QA
SW2NX-SV22A
SW3RN-SV22A
For A172SHCPUN
SW0SRX-SV22C
For Q172CPUN SW6RN-SV22QC
SW0NX-SV22C
SW3RN-SV22C
For A171SHCPUN
SW0SRX-SV22F
SW0NX-SV22F
For automatic
machinery
(SV43)
For A173UHCPU
SW2SRX-SV43A
For Q173CPUN SW5RN-SV43QA
SW2NX-SV43A
For A172SHCPUN
SW0SRX-SV43C
For Q172CPUN SW5RN-SV43QC
SW0NX-SV43C
For A171SHCPUN
SW0SRX-SV43F
SW0NX-SV43F
2.4 Engineering Environment
The following shows the engineering environment that support Q173CPUN/Q172CPUN.
After the purchase of the following software, download and update to the latest version of them from the
Mitsubishi Electric FA Site.
Product Model Available version Remarks
MELSOFT MT Works2 SW1DNC-MTW2-E Ver.1.52E or later
MELSOFT GX Works2 SW1DNC-GXW2-E Ver.1.50C or later
Install GX Developer as well when installing GX
Works2
(Note-1)
.
(Note-1): Install GX Developer together when installing MELSOFT GX Works2.
In "Section 2.4.3 Program Diversion Procedure in PLC CPU Side", GX Developer will be required to convert a sequence program.