Specifications

4- 31
4. REPLACEMENT FROM A-MOTION TO QN-MOTION
4.2.2 When SFC is not used
When no SFC program is used in the A-Motion CPU side program (Diversion source) and servo
parameters and others are diverted, perform the following procedure after the operation of 9).
1) Select "Motion SFC Program Manager".
2) Select "Unused" for "Motion SFC Program", and select "OK".
For the file converted using MT Works2, refer to "4.1 List of Available Data for Diversion (SV13/SV22)",
and set the data that cannot be diverted if necessary. For the multiple CPU parameter setting, refer to
"3.Differences between Q173CPUN/Q172CPUN and A173UHCPU/A172SHCPUN/A171SHCPUN",
"QCPU User's Manual (Multiple CPU System) Model code: SH-080485ENG", and
"Q173CPU(N)/Q172CPU(N) User's Manual Model code: 1XB780".
4.2.3 Precautions for diverting cam data
To edit cam data, read the data directly using "Read Other Type Cam Data".