Specifications

1- 8
1. OVERVIEW OF A-MOTION REPLACEMENT
4.3 3): Partial Update from MR-J2S-B to MR-J4-B
The following shows the procedure for updating a system partially.
MR-J4-B-RJ020
QnUD PLC + QDS-Motion + Q3□DB base
HG motor
MR-J4-B-RJ020 (Conversion unit for SSCNET of MR-J2S-B compatible servo amplifier)
+ MR-J4-T20 (Conversion unit for SSCNET of MR-J2S-B)
MR-J2S-B
HC/HA motor
MR-J4-B-RJ020 (Conversion unit for SSCNET of MR-J2S-B compatible servo amplifier)
+ MR-J4-T20 (Conversion unit for SSCNET of MR-J2S-B)
→ The MR-J4-B-RJ020 to which MR-J4-T20 is connected operates as MR-J2S-B.
In addition, MR-J4-B-RJ020 can drive MR-J4-compatible HG motors and
MR-J2S-compatible HC/HA motors.
* Production will be
stopped in August, 2015.
* Production will be
stopped in August, 2015.
* MR-J2S-B cannot drive HG motors.
* When the network used is changed, change
MR-J4-B-RJ020 from the J2S mode to the J4
mode.
Remove MR-J4-T20.