Specifications

1- 19
1. OVERVIEW OF A-MOTION REPLACEMENT
6.1 Motion Project Diversion Function in MT Works2
6.1.1 Data list available for diversion or not
The following table shows the overview whether the data can be diverted or not for the diversion function
of motion project in MT Works2. The data may not be diverted for the case, but more than half can be
diverted.
For details, please refer to “2. REPLACEMENT PROPOSAL FROM A-MOTION TO QDS-MOTION”.
Data list available for diversion or not
A171SHCPUN, A172SHCPUN A173UHCPU
SV13 SV22 SV13 SV22
System
setting
System setting data
(Servo amplifier has been converted to MR-J3-B/MR-J4-B after diverting)
High speed reading data
Basic setting (Multiple CPU etc. must be set)
Servo
data
setting
Axis data
Fixed parameter (Change electronic gear)
Home position return data
JOG operation data
Servo parameter Besides MR-J2S: , MR-J2S:
Parameter block
Limit output data
: Not use Motion SFC
: Use Motion SFC
Motion
SFC
program
Motion SFC parameter
Motion SFC program
(Device must be revised)
Operation control program
(Device must be revised)
Transition program
(Device must be revised)
Conversion data (Data must be converted again)
Automatic numbering setting
Servo program
(Device must be reviewed)
Mechanical
system
program
Mechanical edit data -
-
Mechanical conversion
data
(Data must be converted again)
Cam conversion data -
-
Cam data
Device memory
SW3RNC-GSVE only
(# device only)
: Can be diverted (can be used directly)
: Data must be revised
: Must be set again
- : Data does not exist because it has not been used in diversion source (A-Motion).