Specifications

1- 22
1. OVERVIEW OF A-MOTION REPLACEMENT
6.2 Ladder Program Diversion Function in GX Works2
6.2.1 Ladder program diversion procedure in GX Works2
This section explains the conversion overview of a ladder program for A-Motion controller (SCPU). For
details of ladder program created by GX Developer, please refer to “2. REPLACEMENT PROPOSAL
FROM A-MOTION TO QDS-MOTION”.
1) After starting GX Works2, select "Start GX Developer" from the "Project" tab.
2) The following shows the conversion of ladder program created by SW3RNC-GSVE. (GPPA file format)
After GX Works2/GX Developer is started, select "Import file" --> "Import from GPPA format file" from
the "Project" tab.
•
Omitted below
•