Specifications

2- 35
2. REPLACEMENT PROPOSAL FROM A-MOTION TO QDS-MOTION
10) The "Change PLC type" dialog box appears. Select "Yes".
Note) In this replacement handbook, "Yes" is selected because the changes will be checked later
by using a support tool.
When the supporting tool is not used, select "Confirm change".
11) The following dialog box appears. Select "OK".
12) When "Save as" is selected from the "Project" tab, the following dialog box appears. Input "Project
name" and "Title", and select "Save".
Some devices cannot be replaced
properly and are forcibly converted to
"SM1255" or "SD1255".
Refer to the explanation about the
usage of the A/QnA->Q conversion
support tool described later and
replace those devices with appropriate
ones.