Specifications

2- 36
2. REPLACEMENT PROPOSAL FROM A-MOTION TO QDS-MOTION
13) The new project creation dialog box appears. Select "Yes".
Although the sequence program has been converted following this procedure, it may not be operated
correctly.
Be sure to refer to the manual after Section 5 for program correction.
(2) Conversion of sequence program for A-Motion created by GX Developer
The following describes an example of the procedure for replacing a sequence project using GX
Developer. Always backup the project before the replacement.
1) After starting GX Works2, select "Start GX Developer" from the "Project" tab.
2) The following shows the conversion of a sequence program for A-Motion created by GX Developer
(GPPW file format).
3) After GX Developer is started, select "Open project" from the "Project" tab.
4) Select the file to be converted, and select "Open".
For the following conversion operations, refer to
(1) SW3RNC-GSVE/SW2□-GSVE sequence program
conversion procedure after 8)
.