Specifications

2- 38
2. REPLACEMENT PROPOSAL FROM A-MOTION TO QDS-MOTION
5.2 Using Procedure of Support Tool
1) Click "Start" --> "MELSOFT Application" --> "AQCnvSupport" to start the support tool.
Then select "A/QnA->Q program conversion support tool execute".
2) The "A/QnA->Q program conversion support tool" dialog box appears. Specify a source file in the
GPPA format, A2SH file, or A3U file for "Project for A/QnA series before PLC type changing". Specify
the file converted to the QnUD(E)(H)CPU type file for "Project for Q series after PLC type changed",
and select "Next".
Then execute the operation according to A/QnA->Q conversion support tool guidebook.
File for compare (A2SH) is above,
and file converted to Q26UDEHCPU
is below