Specifications

2- 47
2. REPLACEMENT PROPOSAL FROM A-MOTION TO QDS-MOTION
Device number batch replacement procedure
The following shows the procedure for replacing devices in a PLC side project using GX Works2.
Always backup the project before the replacement of devices.
1) Start GX Works2, and select "Device Batch Replace" from the "Find/Replace" tab.
2) Select the "Device" tab, and input "Find Device", "Replace Device", and "Device Point". Select "All
Replace".
1) Input the start device before the replacement in Find Device.
2) Input the start device after the replacement in Replace Device.
3) Input device points to replace.
1)
2)
3)
4)