User`s guide

XEN OWNER'S HANDBOOK I
Safety and Regulatory Notices
Safety
Safety and Regulatory Notices
Read the separate Power Connection Guide before using your
computer for the first time. Information in the Owner’s Handbook
relating to connection to the AC power supply may not apply
outside the United Kingdom.
Your computer uses a safety ground and must be earthed. The
system unit AC power cord is its “disconnect device”. Ensure
that the system unit is positioned close to the AC power outlet,
and that the plug is easily accessible.
It is imperative that the computer is set to the correct voltage
range before use. If not, the machine may be irreparably damaged.
Turn off the computer and unplug all power cords before moving
the system unit, cleaning the computer or removing the system
unit top cover.
The CD-ROM drive contains a laser system which is harmful to
the eyes, and is classified as a CLASS 1 LASER PRODUCT
according to IEC 825 Radiation Safety of Laser Products (Equipment
Classification: Requirements & User's Guide). Do not attempt to
disassemble the CD-ROM drive; if a fault occurs, call an
authorized maintainer. Use the CD-ROM drive only as described
in this manual; failure to do so may result in exposure to
hazardous radiation.
To prevent fire and electric shock, do not expose any part of
the system unit to rain or moisture.
When positioning the system unit, monitor and keyboard, take
into account any local or national regulations relating to
ergonomic requirements.