User`s guide

1/8 XEN OWNER'S HANDBOOK
Introducing the Apricot XEN
Chapter 1
1
2
3
4
7
6
5
1 motherboard: see the label inside the system unit lid
for up-to-date information on the layout of the
motherboard.
2 expansion card slots: Three expansion slots, one half
length and one full length ISA, and one full length slot
which can be used by either an ISA or a PCI card. An
additional connector is provided on the rear of the
backplane, this is an Apricot proprietary connector which
may be used in future developments of the XEN range.
3 SIMM sockets: every XEN has 8 Mbytes of
motherboard memory which can be upgraded to 128
Mbytes by the use of single in-line memory modules.
4 processor socket: insert an OverDrive processor
here to upgrade the processing power of your Apricot
XEN.
5 5.25" removable-media drive bay: may be occupied
by a removable media drive.
6 3.5" hard-disk drive bay: this bay has room for two
one-inch high IDE hard disk drives.
7 3.5" diskette drive: fitted as standard in every Apricot
XEN system.