User`s guide

XEN OWNER'S HANDBOOK I
Safety and Regulatory Notices
Safety
Safety and Regulatory Notices
Read the separate Power Connection Guide before using the
Apricot XEN for the first time. Information in the Owner’s
Handbook relating to connection to the AC power supply may
not apply outside the United Kingdom.
The Apricot XEN uses a safety ground and must be earthed.
The system unit AC power cord is its “disconnect device”.
Ensure that the system unit is positioned close to the AC
power outlet, and that the plug is easily accessible.
It is imperative that the Apricot XEN is set to the correct
voltage range before use. If not, the machine may be irreparably
damaged.
Turn off the Apricot XEN and unplug all power cords before
moving the system unit, cleaning the computer or removing the
system unit top cover.
The CD-ROM drive contains a laser system which is harmful to
the eyes, and is classified as a CLASS 1 LASER PRODUCT
according to IEC 825 Radiation Safety of Laser Products (Equipment
Classification: Requirements & User's Guide). Do not attempt to
disassemble the CD-ROM drive; if a fault occurs, call an
authorized Apricot maintainer. Use the CD-ROM drive only as
described in this manual; failure to do so may result in exposure
to hazardous radiation.
To prevent fire and electric shock, do not expose any part of
the system unit to rain or moisture.
When positioning the Apricot XEN system unit, monitor and
keyboard, take into account any local or national regulations
relating to ergonomic requirements.
The Real Time Clock chip on the motherboard includes a lithium
battery. This component may explode if handled incorrectly.
Do not attempt to recharge, disassemble or dispose of in fire.
Keep away from children.
Do not dispose of the Real Time Clock chip, or any assembly
which contains it in domestic waste.