User`s guide

XEN OWNER'S HANDBOOK 6/3
Using the SETUP utility
Chapter 6
Opening menu
The SETUP program initially displays a menu to select three
screens of SETUP options, and various actions including setting
a password, and saving or discarding changes that you’ve made.
SETUP option Description
Standard CMOS Sets up and modifies some basic
SETUP options, such as time, date, floppy
drives, hard drives, keyboard.
Advanced CMOS Modifies more advanced features, such
SETUP as enabling or disabling parity checking,
cache, Num Lock, shadowing, IDE
DMA transfer modes, ISA interrupts,
and ISA linear frame buffers.
Peripheral Sets up and modifies the peripherals
Management SETUP integrated in the SMC37C665 super
I/O controller. This utility specifies the
serial and parallel port addresses.
Configure with Reloads the CMOS RAM with default
BIOS defaults values from the ROM table.
Configure with Reloads CMOS with settings at power-
Power-On defaults up.
Change Password Specifies a password required to boot
the system.
Write to CMOS After modifying any of the SETUP
and exit options, choose this option to save the
new configuration to CMOS.
Do not write to After modifying any of the SETUP
CMOS and exit options, choose this option to discard
any changes made to the configuration
and not save it to CMOS.