User's Manual

CONNECTIONS

OTHERSPRECAUTIONS FEATURES PREPARATION

TROUBLE-

SHOOTING

CONTENTS

Install the print paper into the unit.

Make sure to install the print paper ﬁrmly.

NOTE

Install the print paper into the unit slowly. If it is dropped along the ditches, the unit

or accessories may be damaged.

Roller

Print paper

Remove the sticker, insert the print paper between the roller and

guide as shown right, and feed the print paper until the buzzer

sounds.

• Remove the sticker before inserting the print paper between roller and guide.

Make sure to insert the paper straight.

NOTE

• Keep the roller clean. Dirt on the roller may degrade the print quality.

NOTE

• When taking the print paper out, pull it up toward you by holding the paper

ﬂanges.

• Make sure to turn on the power before replacing the print paper.

• Make sure to eliminate any slack from the print paper. If you carry out the

following steps without eliminating the slack, the print paper may be damaged.

Close the door.

Guide

Press the POWER switch on the rear panel to turn on the power.

After the mechanical initialization is completed, press the OPEN

button to pull out the printing unit.

Pull the knob to open the door.

Direction of paper insertion

BEFORE OPERATION

POWER switch

Knob