DV321 Wide Screen LCD Flat Panel Display 32” (81.
DV321 USER’S MANUAL TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS -------------------------- 1 PREPARATION ----------------------------------------------------------- 3 OPERATING INSTRUCTIONS --------------------------------------Use of the remote control ---------------------------------------To use the menus -------------------------------------------------Main menu ----------------------------------------------------------- 5 5 6 6 CONNECT PERIPHERAL EQUIPMENT -------------------------- 10 Front P
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. y Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product.
PREPARATION 1. Place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. 2. Insert the aerial plug firmly into the aerial socket ANT IN 75Ω at the back of the TV.
3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). 4. Power: Insert the power cord in the wall socket having an AC power supply. 5. Turn the TV on: Press the power button at the top of the TV to turn it on. If the TV is in power off, the indicator in front of the TV illuminates amber. 6. How to assemble speakers: Step 1: Ues (in accessory box) lock to TV noumenon . Step 2: lock speaker as Step 3:connect speaker to TV.
OPERATING INSTRUCTIONS USE OF THE REMOTE CONTROL POWER MUTE Press to turn on/off the TV. The TV is never completely powered off unless it is physically unplugged. Temporarily interrupt the sound or restore it. DISPLAY (1) Display Channel number when use RF input. (2) Display input source when use other input except TV RF input. CH Press or (or ▲ or ▼ button) to browse through the TV channels which are not erased. RECALL To display the previously selected TV channel.
TO USE THE MENUS 1. 2. 3. 4. Press the MENU button repeatedly to display each menu Use the cursor up/down to select a menu item or adjust the setting of Menu item. Use the cursor left/right to enter a submenu or enable the function. Press the MENU button to exit the menu. MAIN MENU Press the MENU button into the main OSD (On Screen Display). Adjust item include VIDEO ADJUST, AUDIO ADJUST, PIP, SLEEP TIMER , SET UP,PC ADJUST. Video Adjust 1. 2. 3. 4.
When adjust any item sub-OSD will show up like this. Audio Adjust 1. 2. Volume is adjusted from 0 to 100. Bass and Treble are adjusted from 0 to 100. You can adjust picture Volume, Bass and Treble to the levels you prefer. When adjust any item sub-OSD will show up like this.
PIP (Only available in PC mode) 1. PIP function is turn on /off small picture 2. Position is move for small picture 3. Source is choose from TV /AV1/AV2/S VIDEO 4. Audio select is choose from MAIN/SUB Sleep Timer is for set a time period after which the TV should switch itself to standby. The counter runs from 30 > 60 > 90 > 120 minutes. The timer begins to count down from the number of minutes selected after the display has disappeared. Note: To view the remaining time, press the SLEEP button once.
5. 6. CH DEL. /ADD. If “ DEL” the channel will be masked. MANU SCAN for search TV Program channel by channel. After scan a new program, press MENU key, it will be automatically saved in the last channel. 7. CH SWAP save the location of current channel and destination channel for each other 8. View Mode : Includes 3 modes: Press repeatedly to select 4:3 /16:9 / non-Linear. 9. Reset is set up to default value of BLUE SCREEN and LANGUAGE . PC Adjust 1. 2. Auto tune is the function auto-sizing for VGA input.
Connect Peripheral Equipment FRONT PANEL CONTROL KNOBS : Press to turn on or off the TV. MENU Key : Press to show the OSD menu and exit OSD menu at the TV. CH Key : Press to perform select function and channel. VOL Key : Press to confirm your function selection and adjustment. Source Key : Press to select your input source. There is a wide range of video and audio equipment that can be connected to your TV. The following connection diagrams show you how to connect them.
VIDEO RECORDER How to connect 1. Connect the supplied antenna cable to the RF IN port of your VCR. 2. Connect another RF cable from the output RF of your VCR to the input of your TV. Better quality when playing from your VCR can be obtained if you also connect the AV (only for stereo equipment) cables If your VCR has an S-VHS video jack: For improved picture quality, connect a S-Video cable with the S-VIDEO input on the TV instead of connecting the VCR to the VIDEO port.
CAMCORDER, VIDEO GAME SET … DIGITAL CAMERA How to connect 1. Use AV to Connect your digital camera, camcorder, videogame set 2. For stereo equipment also connect AUDIO R . S-VHS quality with an S-VHS camcorder is obtained by connecting the SVHS cable with the S-VIDEO input and AUDIO input . How to use 1. 2. Select AV1、AV2 or S-VIDEO input . Turn on the external AV equipment. DVD PLAYER How to connect 1. Connect the three separate component video cables to the DVD player’s.
DIGITAL SET TOP BOX Set up box How to connect 1. Connect the three separate component video cables to the DTV player’s Y, Pb and Pr ports and to the Y, Pb and Pr ports on the TV. 2. Connect the audio cables to the DTV player’s AUDIO L and R ports and to the AUDIO L and R ports on the TV. How to use 1. 2. Select COMPONENT. Turn on the DTV Set Top Box set.
TIPS Care of the screen Do not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently. Unplug the screen before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners or aerosol cleaners.
Product Specification Feature 32” screen WXGA ( 1366 x 768 ) Resolution High Brightness ( 550 cd/m2 ) High Contrast Ratio (800:1 ) Wide Viewing Angle ( 170°H / 170°V ) PC Input Support SDTV/HDTV signal (480i/p,576i/p,720p&1080i ) Items LCD Panel Specification Screen Size Aspect Ratio Resolution Display Area (opening) HxV Pixel Pitch Display colours Contrast Ratio Brightness Viewing Angle Response Time 32” TFT-LCD Panel 16:9 1366 x 768 (WXGA) Lamp Type/Life 60000 hr Colour Temperature Cool / Warm T
Analog: D-Sub 15 pin (detachable cable) DDC 2B Analog: FH: 31.5kHz to 50kHz FV: 60Hz to 75Hz Signal Input PnP compatibility PC Input Input frequency Recommended Analog: 1360x 768 (60Hz) Headphone Mini-jack for stereo (3.5ø) Input Audio Speaker: Two 10 watt speakers Headphone Mini-jack for stereo (3.
Before Calling Service Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost ” or double image *This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may inprove the picture.
GLOSSARY Audio / Video Inputs Located on the rear and the front of the receiver these connectors (RCA phono type plug) are used for the input of audio and video signals. Designed for use with VCRs (or other accessories) in order to receive higher picture resolution and offer sound connection options. S-Video Input Allows direct connection of high-resolution video sources, such as a Super VHS videocassette recorder, Laser Disc player, etc. Provides improved picture resolution, sharpness, and clarity.
Service Contacts If problems remain after checking this manual, please contact your place of purchase or contact. Australian Service Contacts visit the Mitsubishi Electric Australia web site at www.mitsubishielectric.com.