Instruction manual

ManualsBrandsMitsubishi Electric ManualsHome building and DecorDX-ZD5UE(Z)

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

step11. Attach the metal part.

• Adjust the upper side first, then push the lower

side into the unit.

• Take care not to deform the springs.

step12. Fix the metal part with four screws.

step13. Connect the cord to the circuit board on the metal

part.

step14. Attach the front covers.

• Attach the left side cover and push to the left.

• Then, attach the right side cover.

step15. Fix the front covers with two screws.

step16. Close the left end of each screw covers on both sides

of the cover.

• Follow the same procedures when attaching a HDD

to HDD 2, or removing or replacing the HDDs.

Connections