Instruction manual

OUTLINE
2
(
2
)
Preparation of instruments and parts required for operation
Instruments and parts to be prepared depend on how the inverter is operated. Prepare
equipment and parts as necessary. (Refer to page 48.)
(
3
)
Installation
To operate the inverter with high performance for a long time, install the inverter in a
proper place, in the correct direction, with proper clearances. (Refer to page 11.)
(
4
)
Wiring
Connect the power supply, motor and operation signals (control signals) to the terminal
block. Note that incorrect connection may damage the inverter and peripheral devices.
(See page 13.)
(5) Grounding
To prevent an electric shock, always use the motor and inverter after grounding them.
The ground cable provided for reduction of induction noise from the power line of the
inverter is recommended to be run by returning it up to the ground terminal of the
inverter. (Refer to page 39)
1