Instruction manual

113
4
PARAMETERS
4.2.20 Monitor display (Pr. 52, Pr. 54)
Pr. 52 "operation panel/PU main display
data selection"
Pr. 54 "FM terminal function selection"
You can select the signals shown on the operation panel/parameter unit (FR-PU04)
main display screen and the signal output to the FM terminal .
•There is a pulse train output terminal FM. Select the signal using Pr. 54.
<Setting>
Set Pr. 52 and Pr. 54 in accordance with the following table:
Parameter
Number
Factory Setting Setting Range
52 0 0, 23, 100
54 0 0, 1, 2
Signal Type Unit
Parameter Setting
Full-Scale Value of
FM Level Meter
Pr. 52 Pr. 54
Operation
panel LED
PU main
monitor
FM
terminal
Output
frequency
Hz 0/100 0/100 0 Pr. 55
Output
current
A 0/100 0/100 1 Pr. 56
Output
voltage
⎯⎯ 0/100 0/100 2 400V or 800V
Alarm
display
⎯⎯ 0/100 0/100 ×⎯⎯
Actual
operation
time
10h 23 23 ×⎯⎯
Pr. 37 "speed display"
Pr. 55 "frequency monitoring
reference"
Pr. 56 "current monitoring
reference"
Pr. 171 "actual operation hour
meter clear"
Pr. 900 "FM terminal calibration"
Related parameters