Instruction manual

188
PARAMETERS
2)Set "1" (PU operation mode) in Pr. 79 "operation mode selection".
Example: To change the external operation mode (Pr. 79 = 2) to the PU operation
mode (Pr. 79 = 1)
EXT
MODE SET REV
STOP
RESET
FWD
SET
SET
Current setting
Setting change
Press for
1.5s
SET
Middle digit flickers
Most significant
digit flickers
SET
Least significant
digit flickers
0 to 9
SET
Parameter setting mode
Using the key,
choose the "parameter
setting mode" as in 1).
MODE
7 times
9 times
0 to 9
Setting write
Flicker
If appears, make sure that the forward
rotation (STF) or reverse rotation (STR) signal
connected to the control terminal is not on.
If it is on, turn it off.
"1" (PU operation mode) has been set in Pr. 79.
If appears, you did not press the
key for 1.5s when writing the setting.
Press the key once, press the key, and
restart the setting from the beginning.
SET
SET
MAX
MIN