Instruction manual

When a value or parameter needs to be set, the following

symbol has been used. For inverters without a digital

setting dial, the value should be set using their keys.

Setting a frequency

1. Press the to put the inverter into PU operation –

this is indicated by the PU LED being lit e.g.

2. Adjust the frequency value with the setting

dial/keys. When the desired value is found

press . The display will alternate between

’F’ for frequency and the value set in Hz, e.g.

3. Press the or keys to start the

inverter/motor rotation

4. Press the key to stop rotation

STOP

// Basic operation /// Basic operation /// Basic operation ///

Note regarding symbols used