Datasheet

POINT
Parameter SettingProgram Development
By using the new CC-Link configuration editor as
part of the GX Works 2 package, device assignment
tasks have been made much simpler. Just rearrange
the illustrations on the editor screen using the mouse
to complete the device configuration and finish
programming. The devices are then automatically
assigned and listed in an easy-to-view list.
This feature can be easily utilized for label
programming.
POINT
Making programming easier!
Easily and efficiently complete processes from device configuration to programming.
Device Assignment Program Development
MELSOFT Navigator and GX Works2 use drag &
drop and graphic based screens to create a intuitive
setting environment for the CC-Link / AnyWireASLINK
network. Easy operations mean the process from
setting the various parameters to automatic calculation
of the link scan time can be carried out at once. In
addition, the slave station parameters settings can
be confirmed and changed when required. New
modules can be added to CC-Link by installing the
CSP+
✽ 1
released from CLPA
✽ 2
.
✽
1 CC-Link Association
✽
2 Profile prepared by vendors developing CC-Link family
compatible products
✽
3 GX Works2 also supports CC-Link IE Field.
Just select the device,
ready for the design stage!
Easily set the master and slave stations without mistakes!
Set each device without a manual.
No need to consider device addresses!
Create the device
configuration with the
configuration editor
Automatically generate
a list of device
assignments
Program the ladder
diagram while viewing
the device assignments.
Easy!
Can you really set the CC-Link/AnyWireASLINK network
without referring to a manual?!
Select
“Slave station parameter process”
Slave station’s
parameter setting window opens
Mitsubishi CC-Link master station
Easy!
PULL
POWER
USB
PULL
RS-232
MODE
RUN
ERR.
USER
BAT.
BOOT
USB
PULL
RS-232
MODE
RUN
ERR.
USER
BAT.
BOOT
USB
PULL
RS-232
MODE
RUN
ERR.
USER
BAT.
BOOT
←
←
←
←
←
←
Automatically calculates
link scan time
More than 400 types of
CC-Link remote I/Os, GOTs,
inverters and robots are supported!!
Set slave station’s
parameters!
USB, etc. CC-Link
Automatically generate
device assignments from the
configuration screen.
13