Datasheet

POINT
Program Development
In the past, if the device assignments changed,
the same corrections had to be made for each of
the projects. This problem has been resolved by
using MELSOFT Navigator which can share labels
between the programmable controller, motion
controller and GOT. If, for example, a device
assignment is changed in a programmable
controller project, those changes are automatically
applied on the motion controller and GOT projects.
This greatly reduces setting time and setting
mistakes.
Changes are automatically
reflected in all related projects.
Greatly reduce man-hours spent changing settings!
Use system labels to efficiently apply changes throughout the entire system.
Label Sharing
Assign devices for multiple projects
just by changing one setting!
Define labels from
one location
Changes in settings are automatically
applied to each project
GOT
(GT Works3)
Programmable
controller
(GX Works2)
Motion
controller
(MT Works2)
MELSOFT
collaboration!
Field Adjustments
Programmable controller Motion controller GOT
Multiple Device
Data Backup
Programmable controller, motion controller and
GOT... The more equipment you connect to the
system, the longer it takes to read out project data
for backup. With MELSOFT Navigator, if a cable is
connected to the master station’s programmable
controller, to which multiple devices are connected
via bus or network (MELSECNET/CC-Link
IE/Ethernet), the project data for the multiple
devices can be read out in batch. It is unnecessary
to connect cables to each device.
Read out project data for
multiple devices in batch.
Cable connection to
programmable controller
(master station, etc.)
Read from multiple devices with one single cable!
There is no need to individual connect to each device.
Read project
data in batch
MELSOFT
collaboration!
Can you really backup multiple devices
without connecting cables to each one?
POINT
16