Specifications

[Issue No.] GOT-A-0010-AB [Page] 23/41
[Title] List of Valid Devices Applicable for GOT1000 Series
[Date of Issue] Ver. AB: December 2014 (First Edition: September 2005)
[Relevant Models] GOT1000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
4.2.6 System equipment (6)
Manufacturer
2D code
reader
Dedicated cable
Power supply
unit
RS-232 cable
Cognex K.K. DataMan 200
CCB-84901-1003-
△
△
CPS-AC-POE1A-△
△
CCB-M8X4-△△
4.3 Compatible 2D code type
Only “QR code” is supported by the GOT.
4.4 How to read data by a 2D code reader
Please refer to the followings for the data transfer format (header/terminator settings and others) that can be
used in the GOT or the setting method to read data by a 2D code reader.
(a) Data transfer format (header/terminator settings and others) that can be used in the GOT.
(b) Setting to connect a 2D code reader to the GOT. ([Peripheral Setting] on GT Designer3 or [Communication
Settings] on GT Designer2)
(c) Setting to write the data, read by a 2D code reader, to the PLC CPU. ([Detail Setting] in the [Bar Code]
dialog box on GT Designer3 or [Detail Setting] in the [Bar Code] dialog box on GT Designer2)
Refer to the following.
- GT Designer3 Version□ Screen Design Manual (Fundamentals) (SH-080866ENG)
- GT Designer2 Version
□
Screen Design Manual (SH-080530ENG)
(d) Setting the procedure from connecting a 2D code reader to the GOT until reading 2D code data.
Refer to the following.
- GOT1000 Series Connection Manual (Microcomputer, MODBUS Products, Peripherals) for GT
Works3 (SH-080871ENG)
- GOT1000 Series Connection Manual (SH-080532ENG)