Specifications

[Issue No.] GOT-A-0010-AB [Page] 32/41
[Title] List of Valid Devices Applicable for GOT1000 Series
[Date of Issue] Ver. AB: December 2014 (First Edition: September 2005)
[Relevant Models] GOT1000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
(1) RS-232 cable connection diagram for an RFID controller manufactured by LS Industrial Systems Co.,
Ltd.
The following shows connection cables that must be produced by the user.
Maximum cable length: confirm with the RFID controller manufacturer.
RFID controller
Cable connection and signal direction
GOT
Signal name Pin No. Pin No. Signal name
NC 1 1 CD *1
RD(RXD)
2
2 RD(RXD)
SD(TXD) 3 3 SD(TXD)
NC 4 4 DTR(ER)
SG 5 5 SG
NC 6 6 DSR(DR)
NC 7 7 RS(RTS)
NC 8 8 CS(CTS)
NC 9 9 NC
*1: NC for GT11
* For the cables between and , refer to the manual created by LS Industrial Systems Co., Ltd.
(2) RS-232 cable connection diagram for a V600 RFID controller manufactured by OMRON Corporation
The following shows connection cables that must be produced by the user.
Maximum cable length: confirm with the RFID controller manufacturer.
RFID controller Cable connection and signal direction GOT
Signal name Pin No. Pin No. Signal name
－
1 1 CD
*1
SD 2 2 RD(RXD)
RD 3 3 SD(TXD)
RS 4 4 DTR(ER)
CS 5 5 SG
－
6 6 DSR(DR)
－
7 7 RS(RTS)
－
8 8 CS(CTS)
SG 9 9
－
*1: NC for GT11
*For the cables between
and , refer to the manual created by OMRON Corporation