Specifications

C-15
System Examples: 2 (Lossnay M-NET Remote Controller PZ-52SF-E)
The following groups can be configured.
● Further information please refer LGH-RX
4 Technical Manual.
Lossnay
(001)
Power
supply
unit
Lossnay M-NET remote
controller PZ-52SF-E
(106)
(103)
( )
address
Group1
Group6
Group2 Group3 Group4 Group5
Lossnay M-NET remote
controller PZ-52SF-E
(156)
(101)
Lossnay
(013)
Group8
Lossnay M-NET remote
controller PZ-52SF-E (114)
Lossnay
(014)
Lossnay
(015)
Lossnay
(002)
Lossnay
(004)
Lossnay
(005)
Lossnay
(006)
Lossnay
(003)
Lossnay
(010)
Lossnay
(008)
Lossnay M-NET remote
controller PZ-52SF-E
(107) (157)
Lossnay
(007)
Lossnay M-NET remote
controller PZ-52SF-E
Indoor
unit
(009)
MA Remote
controller
Group7
Indoor
unit
(011)
Indoor
unit
(012)
MA Remote
controller
Group9
Indoor
unit
(016)
MA Remote
controller
Outdoor unit
(059)
Centralized controller
(
000
)
Group 1 : One Lossnay unit and one Lossnay M-NET remote controller.
Group 2 : Without a Lossnay M-NET remote controller.
Group 3 : Multiple Lossnay units and one Lossnay M-NET remote controller.
Group 4 : One Lossnay unit and two Lossnay M-NET remote controllers.
Group 5 : Multiple Lossnay units and two Lossnay M-NET remote controllers.
Group 6 : One Lossnay unit is interlocked to one indoor unit.(PZ-60DR-E is not
necesally)
Group 7 : One Lossnay unit is interlocked to multiple indoor units.(PZ-60DR-E is
not neccesally)
Group 8 : Multiple Lossnay units connected to indoor unit transmission cable
side and one Lossnay M-NET remote controller.
Group 9 : Without Lossnay units.
Caution:
● If change the Group setting in the future, no need to change the M-NET wiring, Just change the address setting from central-
ized controller.
● In this application, Lossnay remote controller PZ-41SLB-E cannot be used.
・・・ Group setting
・・・
Interlocked
operation setting