User`s manual

Reference guide
38
8.4 Programming
You program the terminal with the PC software installed on a personal
computer. The terminal will enter the Communication with PC software
mode if you keep the [←] [-] keys down continuously during terminal po-
wer-up.
8.4.1 Creating a project
A program is created through selecting
New
from the File menu. Then
you make selections according to what the PLC system project will be
used for. For more information on this function see the separate PC soft-
ware manual.
8.4.2 Definition of textblocks
Textblocks consists of a arbitrary number of lines. Lines can be up to 16
characters long. If a block consist of two/three lines or more, use the ar-
row keys to scroll between lines on the display. An application can consist
of up to 999 blocks. The following blocks are reserved for the system
blocks as indicated:
0
Main menu
990
Reserved for compatibility with other terminals
991
Time channel editor
992
l Reserved for compatibility with other terminals
999
When you select
New
in the block list the following menu is displayed.