Owner's manual

5.2 CC-Link Communication Settings

5.2.1 Settings on the servo amplifier

In the instructions below we are assuming that you have an operating CC-Link network with the

following specifications:

쎲 Data rate 156Kbit/s

쎲 The master station is a QJ61BT11N module that is integrated in a System Q con-

troller platform with a Q02H-CPU.

Procedure:

햲

Set the number of reserved stations:

햳

Set the station address (max. value 64):

Positioning via a CC-Link Network CC-Link Communication Settings

MR-J3-T 5-33

Fig. 5-3: Correct position of switch S1 for setting the number of reserved stations

Factory default

setting

1 reserved station

2 reserved stations

Fig. 5-4: Set switches x1 and x10 to the correct station address

higher values

lower values

address digits

x10