User's Manual

Before Using the Handset

Using the UIM (FOMA card)

The UIM (FOMA card) is a card in which your phone number and other information are recorded.

Insert the UIM into the FOMA terminal to use it.

･ For details on handling the UIM, refer to the UIM manual.

Inserting/removing the UIM

Use your FOMA terminal with the UIM inserted. If the UIM is not inserted in your FOMA terminal, first insert it.

･ Turn the power off before inserting or removing the UIM.

･ Insert or remove the UIM with the FOMA terminal closed using both hands.

INFORMATION

● Insert or remove the UIM carefully as forcing it may damage the card.

● Carefully handle the removed UIM so that it does not become lost.

● When attaching the battery pack, make sure that the UIM tray is in place. If not, you cannot attach the battery pack.

Forcibly attaching the battery pack may damage the UIM or the tray.

● When pushing the UIM tray in, make sure that the UIM is properly placed in the tray. Forcibly pushing the tray into the

FOMA terminal may cause an operation error.

Inserting the card

aRemove the back cover and then

the battery pack. ☛P39

bPull out the tray.

Place your finger on the tray and

slide it out until the tray stops.

cWith the IC side of the card

facing down, slide the UIM on the

tray to match the cut corner of

the UIM to the cut corner of the

tray.

dPush the tray in until it stops.

eReattach the battery pack and

then the back cover. ☛P39

Removing the card

UIM

Cut corner

Tray

Tray is pulled out until it stops.

aPull out the tray.

• The operations are the same as a to b in

“Inserting the card”.

bRemove the UIM by sliding it out.

When the UIM tray is removed

Insert and push the tray

straight in.

● Remove the UIM

before replacing the

tray.

T.B.D