User's Manual

42
Before Using the Handset
How to charge
Use the FOMA AC Adapter 01/02 (optional) to charge the battery. It can also be used with the Desktop Holder
D13 (optional).
･ The battery pack can only be charged when it is attached to the FOMA terminal.
･ For details, refer to the manuals for the AC adapter and the Desktop Holder.
■ Charging the battery with the AC adapter alone
You can charge the battery with the FOMA terminal either closed or open.
■ Charging the battery in the Desktop Holder
･ When inserting the FOMA terminal into the Desktop Holder, be careful not to put a strap in the holder.
･ When the FOMA terminal is not inserted firmly or it leans, the battery is not charged normally. Insert
the FOMA terminal until it clicks.
･ Insert the FOMA terminal into the Desktop Holder in the direction as shown in the above figure. If you
insert in a wrong direction, the battery cannot be charged.
･ When you push the projection of the Desktop Holder, the charging terminals protrude. Do not push the
projection unless you charge the FOMA terminal. Do not touch the charging terminals with your hands,
fingers or some other part of the body when the Desktop Holder is connected to a wall outlet.
aUnfold the power plug from the AC
adapter and plug it into a 100 V AC
outlet.
bOpen the external connection terminal
cap of the FOMA terminal.
cInsert the AC adapter connector in
firmly until it clicks.
dCheck that charging starts.
Check that the Enter key lights in red.
When charging is completed, remove the
AC adapter connector from the FOMA
terminal while pressing the release buttons
on both sides of the connector, and unplug
the AC adapter from the outlet. Then, close
the terminal cap.
aUnfold the power plug from the AC
adapter and plug it into a 100 V AC outlet.
bInsert the AC adapter connector in the
Desktop Holder until it clicks.
cAlong with the Desktop Holder, insert
the FOMA terminal at the angle as
shown in the figure in the direction of
the arrow c.
dCheck that charging starts.
Check that the Enter key lights in red. When
charging is completed, remove the FOMA
terminal from the Desktop Holder by tilting it
to the front while holding the Desktop Holder
by hand.
Enter key
Release button
Power
plug
AC
adapter
Connector
( up)
100 V AC
outlet
Enter key
Desktop Holder
AC
adapter
Power plug
100 V AC
outlet
Connector
( up)
T.B.D
T.B.D