User's Manual

45
Before Using the Handset
INFORMATION
● When you turn on the FOMA terminal after replacing the UIM (except when Omakase Lock (Remote Lock) is set), entry of the
4 to 8-digit terminal security code is required. After entering the correct terminal security code, the standby display appears.
If a wrong terminal security code is entered 5 times consecutively, the power is turned off ( but can be turned on again).
● When you turn on the FOMA terminal, the PIN1/PIN2 code entry screen appears depending on the setting (☛P155,
P402). Enter the PIN1 code or PIN2 code.
● When Normal use of Display light time in Display Light Setting is set to other than Always, if you do not press any keys for
about 90 seconds, the screen display disappears. ☛P140
Making initial settings Initial Setting
When you turn the power on for the first time, set the date and time, terminal security code, keypad
sound and other settings.
･ By default the following items are set:
1
Turn the power on ☛P44
2
Set each item z p
･ If you press f to end the operation without setting Password or Request permit/deny, a confirmation
screen appears asking whether to quit. If you select Yes and quit, the initial setting screen appears the
next time you turn on the power.
･ You can quit in the middle and change the settings afterward.
Setting item Default Setting item Default
Date & time Adjust time/time diff: ON Motion control
setting
i-motion: Landscape play
Full Browser: ON
Document Viewer: ON
Interior design clock: ON
Machi-chara: ON
Display new mail: OFF
Music skip: OFF
Smiley/Pict/Symbol: OFF
Password 0000
PushTalk caller ID Hide caller ID
Request permit/deny Always deny*
1
Keypad sound Keypad sound1
Speed selector sound Selector sound1
Slide
sound
Open slide Melody/
スライド・オープン音 1
(Slide opening sound 1)
*1 Always permit is highlighted on the screen,
regardless of the actual setting.
Close slide Melody/
スライド･クローズ音 1
(Slide closing sound 1)
Date & time ：Enable or disable the automatic time correction and set the date and time. ☛P46
Password ：Set the terminal security code used for various terminal operations. ☛P155
PushTalk caller ID ：Set whether to notify the caller ID when you make a PushTalk call and add a
member during PushTalk. ☛P96
Request permit/deny ：Set whether to permit Location Request and provide the location information. You
can set to either permit or deny Location Request. To set the permission period, use
Request Permit/Deny. ☛P300
Keypad sound ：Set the sound generated when pressing the keypad. ☛P126
Speed selector sound ：Set the sound generated when rotating the Speed Selector. ☛P126
Slide sound ：Set the sound generated when opening/closing the FOMA terminal. ☛P127
Motion control setting：Set the functions for Motion Control. ☛P383
Next
▲