User's Manual

60
Voice/Videophone Calls
1
m8732 z 1 - 4
Making a call by attaching Chaku-moji
Up to 10 messages can be recorded in the history of sent messages. When the number of recorded
messages exceeds 10, they are deleted, oldest first.
When the 2in1 service is subscribed, up to 10 sent messages are recorded for each of Number A and
Number B. In total up to 20 messages are recorded. In the A mode, only messages sent by Number A are
displayed. In the B mode, only messages sent by Number B are displayed. While in the dual mode or when
2in1 is deactivated, all the sent messages are displayed.
1
Enter the phone number z m3
2
Select a Chaku-moji message
Creating a message: 1 z Create a Chaku-moji message
Follow the procedure from Step 3 in “Creating a Chaku-moji message”. P59
Selecting a registered message: 2 z Select a Chaku-moji message
Selecting from the history of sent messages: 3 z Select a Chaku-moji message
In the dual mode of 2in1, appears for a message sent by Number B.
3
m
When the Chaku-moji is received by the other party’s terminal, Transmission completed appears and
transmission fee is charged.
When the Chaku-moji is sent to an incompatible terminal or is not received due to Message Display
Setting of the other party’s terminal, Transmission failed appears and transmission fee is not charged.
INFORMATION
PushTalk does not support Chaku-moji.
If the receiver’s terminal is in one of the following cases, Chaku-moji is not received and is not recorded in the received
call history. In addition, the transmission result does not appear on the sender’s screen. In this case, transmission fee is
not charged.
Outside the service area or turned off In Public mode (Driving mode)
When the response time of Answer Machine is set to 0 second, etc.
Even when Chaku-moji is received, the transmission result may not appear on the sender’s screen depending on radio
wave conditions. In this case, the sender is charged for the transmission.
When a call with Chaku-moji is received within the delay time set in Mute Ring Time Setting, the Chaku-moji is displayed
and is recorded in the received call history. In this case, the sender is charged for the transmission.
You cannot send or receive Chaku-moji when using the FOMA terminal overseas.
Making the Chaku-moji reception setting Message Display Setting
Default Only with Caller ID
Display all Displays all Chaku-moji.
Hide all Hides Chaku-moji.
Only from stored No.Displays Chaku-moji only from a party registered in the phonebook.
Only with Caller ID Displays Chaku-moji only from a party with the caller ID.