User's Manual

63
Voice/Videophone Calls
Setting for international calls Int’l Call Assist
You can set whether to make an international call by replacing “+” which was entered at the beginning of a
phone number with the international access code set in this setting, and whether to make a call from overseas
by adding the country code.
1
m8921 z Set each item z p
･ Up to 22 country codes can be registered.
1
m8922
2
Select an item
■ Setting the country code which is to replace: Highlight an item z p
indicates the set country code.
■ Deleting: Highlight an item z m3 z Yes
3
Country name field z Enter a name (up to 16 one-byte or 8 two-byte characters)
4
Country code field z Enter a code (up to 5 digits) z p
･ Up to 3 international access codes can be registered.
1
m8923
2
<Not recorded>
■ Setting the international access code which is to replace “+”: Highlight an item z p
indicates the set international access code.
■ Deleting: Highlight an item z m3 z Yes
3
Name field z Enter a name (up to 16 one-byte or 8 two-byte characters)
4
Intn’l prefix No. field z Enter a code (up to 10 digits) z p
Default Country code: ON (Country code: 81, Country name: 日本(Japan))
Intn’l prefix: ON (Name: World Call, Intn’l prefix No.: 009130010)
Setting the auto-switch function
Country code：Set whether to automatically replace with the country code when calling from overseas.
･ When ON is set, select a country code.
Intn’l prefix ：Set whether to automatically replace “+” with the international access code when calling from
Japan.
･ When ON is set, select an international access code.
Editing the county code
Registering the international access code (International prefix)
Next
▲