User's Manual

82
Voice/Videophone Calls
Adjusting the brightness/color density/flicker of outgoing images Camera Setting
You can adjust the brightness and color density in 5 levels. Also, you may be able to control the flicker of
images, if it occurs, by making settings according to the power supply frequency in your area.
･ This setting is available only while your self image is being sent.
･ The brightness and color density may not be changed depending on the settings of Screen Mode/Effect.
･ This setting is retained even after the call is finished.
1
m2 during a call z Select an item
■ Adjusting brightness and color density:
■ Adjusting flicker: 3 z 1 - 3
INFORMATION
● The flicker adjustment settings for the camera and Bar Code Reader will reflect changes in this setting. ☛P189, P191
Sending the still image/camera-off image
Select a still image or the image displayed as Camera off (camera-off image).
･ This setting is not available while a frame is being sent. ☛P81
･ Only the still image that is 176 x 144 or smaller and is permitted to output from the FOMA terminal can be
set.
1
m3 during a call z Select an item
■ Sending the camera-off image: 3
･ When the camera-off image is set, the substitute image set in Videophone Image Setting is sent.
However, if Chara-den is set as the substitute image, the default image (camera-off image) is sent.
■ Sending a still image:
Default Brightness: level 3 Density: level 3 Flicker adjustment: Auto
a 2 z Highlight Brightness slider z &
b d to highlight Density slider z & z p
･ Your self image is displayed on the main screen while adjusting.
･ If you do nothing on the terminal for some time after changing the
slider’s position, the settings are not changed and the talking screen
reappears.
a 4 z Select a folder
b Select a still image
･ To view a still image: Highlight a still image z p
･ To send the previous image: o while sending a still image