User's Manual

83
Voice/Videophone Calls
Switching display magnifications Zoom
･ This setting is available only while your self image is being sent.
1
& during a call
･ Each press of r switches the magnification of image as follows. Press l to switch in the reverse
order.
In-camera : normal ( ) → 2x ( )
Out-camera: normal ( ) → 2x ( ) → 4x ( ) → 6x ( ) → 8x ( )
→ 10x ( ) → 12x ( ) → 16x ( )
INFORMATION
● Zooming will be canceled if you switch between the in-camera and out-camera.
Switching to the out-camera
･ This setting is available only while your self image is being sent.
1
m6 during a call
Switching the camera to the macro mode
You can switch to the macro mode and adjust the focus of the image when sending the image of an object
about 7 to 11 cm away.
･ You can switch the camera to the macro mode only while the out-camera is used.
1
m4 during a call
･ To cancel the macro mode, repeat the same procedure.
INFORMATION
● If you switch to the in-camera in the macro mode, the camera returns to the normal mode.
Default normal ( )
Default in-camera
Default Macro OFF
The image through the out-camera is sent.
･ Each press switches between the in-camera and
out-camera.
･ Even if you switch the cameras, the frame and the
settings of brightness, color density and flicker
adjustment for outgoing image are kept.
In-camera selected Out-camera selected