User's Manual

23
AUTOMATICALLY
To send a consecutive string of DTMF tones during conversation,
>
DTMF touch tones cannot be sent when a call is on hold.
Pause Feature
DTMF number strings, separated by pauses, can be stored in the Phone
Book the same way you store phone numbers.
To insert an automatic 1.5 second pause before DTMF tones are sent,
To automatically pause for 3 seconds, enter ‘pp.’
Any number of pauses can be stored together with a maximum of 20-46
characters (dependent upon the SIM and the phone’s memory capacity).
Holding and Retrieving a Call
To make a second call when one call is on hold,
>
Both calls can be ended at the same time by pressing .
Another way to hold, retrieve and make a second call during conversation is
to press Options and select Hold. Follow the steps listed above.
When a call is on hold, the Options menu has Retrieve choice.
See also Conference Calls on page 24.
1
Press Options and select Auto DTMF.
2
Enter the DTMF numbers by using the keypad or from a
number stored in the Phone Book (under Names ).
3
Press OK to send the tones. After the tones have been
sent the normal conversation screen displays.
Press and hold . The symbol * appears first, then the symbol +,
then the letter p will appear on the screen.
Press to put a call on hold during conversation.
Press or Unhold to retrieve a call.
1
After putting the call on hold, enter a number, press and
establish the call.
2
Press to swap between the two calls.
3
To end either the current call or the held call, select End
active or End held call in the Options menu. The remaining
call is automatically retrieved.
4
Press to end the remaining call.