User's Manual

24
Call Waiting
Call waiting is a network service that allows you to put an existing call
'on hold' while you answer or make a second call.
To activate or cancel call waiting,
USING CALL WAITING
When a second call comes in, you will hear a 'double beep'; and an
animated phone icon and the phone number (if available) will display.
• Either press to answer the call and put the first call on hold or press
Reject to send the incoming call to voice mail.
• Press to swap between the two calls.
• Press Replace to end the first call and take the incoming call.
• See Step 3 in Holding and Retrieving a Call to end one or both calls.
Example of a multiparty call screen.
The signal strength, time of day, Line 2 in use,
and battery level icons appear on the top line.
The active call type is in bold, displaying
name and call time elapsed.
If possible, the time elapsed from the start of
the multiparty call may display.
Conference Calls
This feature allows you to make or receive between 2 to 5 calls at the
same time with all parties being able to hear and talk with each other.
1
Press . Select Settings. Select Services.
2
Select Call waiting.
3
To check the current setting, select Status. The network will
send a display stating whether Call Waiting is active or not.
4
To change the setting, select Activate or Cancel.
Requesting displays. The network will confirm your request.
1
Enter a number, press and establish the call.
2
Enter another number and press . The first call will be put
on hold while the second call becomes active.
3
Press Options for these options: